Scale: 1/24
Length: 14"
Winspan: 19.8" 

The early Cessna 210 (210 and 210A) had 4 seats and an IO470 260-hp engine. It was essentially a Cessna 182 on which retractable gear had been added. In 1961 the fuselage and wing were completely redesigned - the fuselage was made wider and deeper, and a third side window was added. The wing planform remained the same (constant 64" chord from centerline to 100 inches out, then straight taper to 44" chord at 208 inches from centerline), but the semi-Fowler flaps (slotted, rear-moving) were extended outboard, from Wing Station 100 to Wing Station 122, which allowed a lower landing speed (FAA certification regulations state that a single-engine aircraft must have a flaps-down, power-off stall speed no greater than 70 miles/hour). To compensate for the reduced aileron span, the aileron profile was changed and its chord enlarged. The 1964 model 210D introduced a 285-hp engine and 2 small child seats, set into the cavity which contained the mainwheels aft of the passengers.